There is no doubt that roof hail damages are hard to spot. This is especially the case if you haven’t experienced hail damage on your roof as a homeowner. Once your roof has been damaged by a hailstorm, your home becomes more susceptible to roof leaks or even some bigger problems like the rapid deterioration of roofing materials or shingles.
After the recent hailstorm in Frisco and McKinney, Texas we decided to come up with this guide to help you identify hail damage on your roof. With this guide, you will be equipped with some of the best strategies in the roofing industry for inspecting signs of roof hail damage.
Before you try and inspect your own roof, you should know that inspecting roofs on your own can be quite dangerous. This is why we would advise you to practice safety first and not to get onto your roof until you have the proper safety gear.
If you think you’re not the right person for the job, you should consider calling in a local and reputable roof replacement company in Dallas with considerable construction experience. They will conduct a thorough inspection on your roof and be able to fix hail damages.
That being said, we can now move onto what you should look out for after you’ve been through a hailstorm.
On your roof, you should look around for dings and dents on your downspouts and gutters. If your area has experienced a hailstorm, then the hailstones may have caused small dents on metal downspouts and gutters that need repairing.
A cracked or dented mailbox will often indicate that your home has been through a recent hailstorm. You should look for holes or cracks in plastic mailboxes along with dents on the metal ones.
The impact of hailstones hitting at 120 or more mph tends to remove algae, grime, and dirt from the driveway of homes. This distinction is also a useful method for determining the direction and size of the hailstones. These splatter marks on your driveway are a good way to know for sure whether there was hail during a storm.
Go ahead and inspect the sidings of your roof for holes, paint chips, cracks, dents, and splatter marks. Most heavy hailstorms tend to cause damages that are all too obvious. Smaller hailstones, on the other hand, will also cause damages but these may not be as obvious.
Windowsills and casings also tend to form dings, dents and cracks all too often during hailstorms. The caulking of these fixtures should also be checked for signs of impact like tears or streaks. Of course, it goes without saying to check glass windows for cracks from the direct impact of hail.
You should also visually inspect for loose shingles or broken bits that may have fallen into your yard or anywhere around the house. Hail is typically followed by really strong winds, which is why it is common to see broken shingles in your yard. Finding shingles blown off of your roof after a storm is a pretty good indicator that you should have a roof inspection for hail damage.
Homeowners can also check their utility shed for damages to the metal siding and roofing. You should take a close look at these metal sheds for any signs of dents. Shingled utility sheds, on the other hand, can be inspected for shingles that are missing granules or ones that have become dimpled.
Among the common signs of roof hail damage is also the chance of external air conditioner units getting damaged. If this is the case, then the condenser coil fins of your unit will most likely have visual dents.
Naturally, hailstones will cause the soft metal installations of your home to form dents and scratches as well. This is another important element to include in your roof inspection list to fix hail damages.
It is also important for homeowners to look for deformation or tears in their plastic or metal leaf guards, gutters or screens. Other than this, homeowners should also know that hail damage to roofs will also cause the shingle granules to break loose from the impact of hailstones. If you notice the granules of shingles missing or inside your gutters, you should expect to find additional hail damage on your roof.
While these may be some of the most obvious signs of roof hail damages, there are so many more signs you could miss. Don’t take the chance of overlooking small roof repairs or risk putting yourself in danger by inspecting your own roof. If you need an experienced Garland roof replacement company, call R2 Roof Guys for a free roof inspection in Dallas. Our experienced roofing contractors have handled Garland roof repairs for over 35 years. Let us guide you through filing an insurance claim for your roof replacement.
Don’t wait around! The next hailstorm may be right around the corner.
R2 Roof Guys – Serving Dallas, McKinney, Rowlett, Garland, Plano, Frisco Roofing Contractor
(SOURCE) March 24, 2019 — “According to AccuWeather Meteorologist Frank Strait, there have been a number of reports of wind damage and hail damage from the storms this evening March 24, 2019. The worst so far has been in Collin County, Texas, in and just south and west of McKinney. Baseball-sized hail was reported; it may have been even larger than that in a few places,” Strait said.
As per R2 Roof Guys a Dallas based Roofing contractor, “When you’re on your roof, you should be looking for possible hail damages to different parts of your roof. You may even ask your neighbors whether they have any hail or weather damage to their roof. Call R2 Roof Guys at 214-405-4396 for any emergency repairs to your roof from hail damage in Frisco, TX and McKinney, TX.”
For more roofing repair tips from Garland roof replacement company R2 Roof Guys visit their blog.
R2 Roof Guys – Serving Dallas, McKinney, Garland, Plano Roofing Contractor
Have you been considering replacing your roof with steel or other forms of metal roofing? Well, with the help of this expert and unbiased article, Garland roof replacement company R2 Roof Guys will present you with the pros of metal roof replacement. This article is based on our years of experience handling Garland roof repairs, and will hopefully help you make an informed decision about whether you should go forward with a metal roof.
All of these pros have been weighed against those offered by other common roofing materials such as tile, wood and asphalt. So let’s move forward and help you choose between the different type of roof replacements in Dallas.
Metal roofing is a far better option than other roof materials such as asphalt, wood and tile for the following reasons.
If a metal roof in Dallas is installed properly, it can last as long as your house itself. A properly installed metal roof will be able to effectively seal out water, easily shed snow, and survive high winds. Metal is known to be an element that is quite resistant to fire, rot, insects, and even mildew – so it shouldn’t be a surprise that metal roofs have quite a long life in North Texas.
The warranties of metal roofs vary according to different factors and companies. Some companies will back up their products from anywhere between 20 and 50 years.
In comparison to the weight of tile roofing, which stands at 750 pounds per 100 square feet and concrete tiles that stand at 900 pounds per 100 square feet, metal roofing is considered to be quite lightweight. Most of the varieties in the same category can run somewhere between 50 and 150 pounds per 100 square feet.
Why is a lightweight material good for your roof? Well for one, you can save cost on building and engineering in order to support the structure of your roof. In fact, if you’re building or restructuring your own home, you can even go ahead and reduce or downsize the metal support members of your roof.
There are also some types of metal roofing materials that can be applied as part of the existing roof. This is done to work as an additional structural support for the portion of your roof that may have been damaged.
Most metal components of roofing materials can be acquired as part of multiple-shingle sections. These sections can be somewhere between 12 and 36 inches wide. Because of this, the most accomplished roofing contractors can install metal roofing materials very quickly.
Even if your roof had been stripped off due to a storm, the shortened process of metal roofing can work as a critical advantage. Naturally, there will also be considerable labor savings on your budget as opposed to other roofing material installations.
Metal roofing materials are known to be noncombustible. For this reason, the material is classified with Class A firing ratings – which is the highest rating you can get in terms of fire-resistance. It’s important to be aware that this rating is only as good as the materials that are used under a metal roof.
For example, if metal roofing materials are installed on top of underlying material made up of combustible shingles, the chances of fire may increase. These types of roofs are classified as Class C.
Metal is known to reflect radiant heat from the sun in order to minimize the heat gain in the middle of the day. This results in homeowners actually saving money because of the reduced cost of air conditioning used during the day.
Even though rigid foam is known to have a low insulation R-value, with the combination of metal roofing homeowners can experience great insulation. Many systems are known to utilize the dead air-space between the roof deck and the metal in order to increase the efficiency of energy conservation.
You can be sure that metal roofing is quite impervious to snow and rain due to the way the panels interlock and form a slippery and hard surface. What’s more? Darker tones of metal roofs can quickly warm up the snow and encourage it to melt quickly.
Most subcategories of metal roofing can be easily installed on gently pitched roofs without causing a risk of roof leaks. Installing a metal roof typically causes a roof pitch of anywhere between 3 and 12 inches, which is minimal when compared to other materials.
And with this final advantage over other roof materials, we hope you see the benefits of metal roofing for homeowners. If you have any follow-up questions, contact a roofing contractor in Garland like the roof replacement guys at R2 Roof Guys for advice.
At R2 Roof Guys, we have over 30 years of experience with Garland roof repair and roof replacements. Remember that getting the lowest price for a roofing project is great, but getting the best value for what you’re paying is even better. No matter what roofing material you decide to use, make sure that the final cost of your new roof installation includes all of the essential things needed during a roofing project. Call us at 214-405-4396 to schedule a free inspection or for any questions you might have about metal roof replacements.