Roof installation is a grand investment. The right quality, material and insulation of the roof can enhance the indoor quality of your house. If your roof isn’t properly insulated or is easily damaged by frequent rain or hailstorms, then you’ve probably not invested in a worthy choice.
Fortunately, you don’t have to figure out all of the roofing solutions by yourself. Many professional roofing companies and experts can advise you on different roofing designs to fit your home’s exterior and protect against your local weather conditions.
If you’re still trying to decide on what type of roof replacement to get, you should try consulting with a professional roofing company to expedite the decision. Choosing a roof replacement should not be something you do out of impulse, and it can be a disruptive process depending on the roofing company you choose for the job. Here’s a handy checklist from our team of Garland roof repair specialist at R2 Roof Guys that will help you before the job even starts.
1. Remove All Satellite Dishes and Antennae
If you’re getting a partial roof replacement, you’ll probably won’t need to change much in the house. However, if your entire roof is changing, then it’s wise to bring down all the satellite dishes, antennas, and any other heavy objects.
2. Protecting Delicate Items
There will definitely be plenty of sawing, hammering, and drilling taking place in and around the house, which will send down vibrations you can see and hear throughout the interior. If you have any delicate items hanging like paintings, chandeliers, or expensive china, then make sure to remove them from the walls as they have a risk of falling.
3. Cut Down Your Lawn
Make sure to give your grass a freshly spruced cut. When the asphalt from the roofs is being torn off, the nails are quite likely to fall off into the backyard. Your roof installer will obviously clean them up, but a neatly cut grass makes it easier to identify the fallen nails.
4. Make Sure the Venting is Intact
Your house has several pipe vents in the bathroom that take all the sewage and toxic gases up the roof and out. During the roof replacement, make sure the lead pipes don’t break. Most roofers would just install an inexpensive pipe and bend it to fit the new roof design. Your job, as a homeowner, is to disallow that and ask for the best quality vents. If not, your house will start smelling because the sewage won’t be disposed of properly.
While there are many things in a roofing installation checklist, these tips are the most important for being prepared. If you’re taking the time to have a new roof replacement, it may also be a good time to think about replacing your roofing material with a metal roof replacement. Depending on the material you choose, make sure your roofing company has experience installing that specific type of roof.
When it comes to roof repair in Garland, TX, always choose the best and most experienced professionals at R2 Roof Guys to avoid any costly repairs. Call R2 Roof Guys in Garland, TX for all of your Garland roof replacement needs.
Have you been considering replacing your roof with steel or other forms of metal roofing? Well, with the help of this expert and unbiased article, Garland roof replacement company R2 Roof Guys will present you with the pros of metal roof replacement. This article is based on our years of experience handling Garland roof repairs, and will hopefully help you make an informed decision about whether you should go forward with a metal roof.
All of these pros have been weighed against those offered by other common roofing materials such as tile, wood and asphalt. So let’s move forward and help you choose between the different type of roof replacements in Dallas.
Metal roofing is a far better option than other roof materials such as asphalt, wood and tile for the following reasons.
If a metal roof in Dallas is installed properly, it can last as long as your house itself. A properly installed metal roof will be able to effectively seal out water, easily shed snow, and survive high winds. Metal is known to be an element that is quite resistant to fire, rot, insects, and even mildew – so it shouldn’t be a surprise that metal roofs have quite a long life in North Texas.
The warranties of metal roofs vary according to different factors and companies. Some companies will back up their products from anywhere between 20 and 50 years.
In comparison to the weight of tile roofing, which stands at 750 pounds per 100 square feet and concrete tiles that stand at 900 pounds per 100 square feet, metal roofing is considered to be quite lightweight. Most of the varieties in the same category can run somewhere between 50 and 150 pounds per 100 square feet.
Why is a lightweight material good for your roof? Well for one, you can save cost on building and engineering in order to support the structure of your roof. In fact, if you’re building or restructuring your own home, you can even go ahead and reduce or downsize the metal support members of your roof.
There are also some types of metal roofing materials that can be applied as part of the existing roof. This is done to work as an additional structural support for the portion of your roof that may have been damaged.
Most metal components of roofing materials can be acquired as part of multiple-shingle sections. These sections can be somewhere between 12 and 36 inches wide. Because of this, the most accomplished roofing contractors can install metal roofing materials very quickly.
Even if your roof had been stripped off due to a storm, the shortened process of metal roofing can work as a critical advantage. Naturally, there will also be considerable labor savings on your budget as opposed to other roofing material installations.
Metal roofing materials are known to be noncombustible. For this reason, the material is classified with Class A firing ratings – which is the highest rating you can get in terms of fire-resistance. It’s important to be aware that this rating is only as good as the materials that are used under a metal roof.
For example, if metal roofing materials are installed on top of underlying material made up of combustible shingles, the chances of fire may increase. These types of roofs are classified as Class C.
Metal is known to reflect radiant heat from the sun in order to minimize the heat gain in the middle of the day. This results in homeowners actually saving money because of the reduced cost of air conditioning used during the day.
Even though rigid foam is known to have a low insulation R-value, with the combination of metal roofing homeowners can experience great insulation. Many systems are known to utilize the dead air-space between the roof deck and the metal in order to increase the efficiency of energy conservation.
You can be sure that metal roofing is quite impervious to snow and rain due to the way the panels interlock and form a slippery and hard surface. What’s more? Darker tones of metal roofs can quickly warm up the snow and encourage it to melt quickly.
Most subcategories of metal roofing can be easily installed on gently pitched roofs without causing a risk of roof leaks. Installing a metal roof typically causes a roof pitch of anywhere between 3 and 12 inches, which is minimal when compared to other materials.
And with this final advantage over other roof materials, we hope you see the benefits of metal roofing for homeowners. If you have any follow-up questions, contact a roofing contractor in Garland like the roof replacement guys at R2 Roof Guys for advice.
At R2 Roof Guys, we have over 30 years of experience with Garland roof repair and roof replacements. Remember that getting the lowest price for a roofing project is great, but getting the best value for what you’re paying is even better. No matter what roofing material you decide to use, make sure that the final cost of your new roof installation includes all of the essential things needed during a roofing project. Call us at 214-405-4396 to schedule a free inspection or for any questions you might have about metal roof replacements.